Request form Pick-o-Mat (PM)

Configuration of the central unit

Produkt:
Configuration of the central unit:

(50 mm possible using a special depositor module)

Rotary encoder

Handling module

strokes, arrangement and adjustment dimensions acc. to the form:
Drilling pattern of the mounting surface
Color

Type of rotary table

Motor position:
Color

Lifting module

Drilling pattern of the mounting surface
Color

Pressing module

Drilling pattern of the mounting surface:
Color

Base frame

Color

Electrical drives (central unit and rotary table)

Control system of the central unit and of the rotary table

base plate

Module arrangement and setting dimensions

Size of the POM:
station Module1 Horizontal stroke [mm] (handling module only)2 setting dimension horizontal H [mm]3 vertical stroke [mm]4 setting dimension vertical V [mm]3
Add a line
Note:
1 h = handling module, p = pressing module, l = lifting module. Please assign the modules to the corresponding station. If no gripper plate is required, distandce H is up to the front side of the guide rail.
2 Stroke variants: 80/90/100/120/140
3 The values for setting dimensions H and V are always specified in the "upper/extended" position
4 Stroke variants: handling: 30/40/50; lifting: 58.3/70; pressing: PM 1100P: 40.5/49.5; PM 1500P: 41/50.5

Contact info


* Mandatory fields